Used Sheet Metal machinery for sale

Used Iowa Precision / Welty Way Coil Line - $40,000.00

Used Iowa Precision / Welty Way Coiline

Price - $40,000.00

Item # BAI513

More Pictures of this USED Welty Way Coiline

• welty way uncoilier (4 manual underfed uncoilers)
• shoil sN#56921
• (Shear & Bead - 16 gauge capacity)
• welty way auto notcher SN#6914
• lockformer dropping conveyor 48" X 60" SN# CONV128
• Welty way transfer table
• lockformer duplex rollformer SN# 9D8430 (snaplock & pittsburgh)
• welty way / Bruct Brake SN#B6911 (not currently being used)
• new electronic eyes
• original manuals
• wiring diagrams are included
• S/N : see above
• Electrics : 230 / 3 phase
• Approx. MFG Date : 1968/1969
• approx. new list price : N/A
• Location : Offsite - available for Demo until october 27, 2009

Used Engel Front End Coil Line - $100,000.00

Used Engel Front End Coiline

Price - $100,000.00

Item # VSM512

• 6 station 5' wide coil capacity overfed coil cradles with coil drive assembly (CDA).
• 6 position selector station for feeding coil into the coiline pinch roll.
• 5' EMM 516 compact coiline with bead , notch and shear
• customer has added automatic controller notch depth posision for s & D and TDF
• customer has added automatic hole punch for tie rods
• newer allen bradley controls
• capacities : 26 gauge to 18 gauge mild steel
• 5' Coiline
• model #: EMM516
• Approximate MFG. Date : 1982
• Electrics : 230 / 3 phase
• S/N : 300020
• Location : Offsite

Used Iowa Precision Coil Line - $120,000.00

Used Iowa Precision Coiline

Price - $120,000.00

Item # QC01

• tDC
• Duplex Rollformer
• shear
• beader
• notchers
• wrap brake
• starter line 5' capacity
• res. 8' capacity
• electrics : 460/230
• approx. mfg. Date: starter line is late 1970's and downstream components 1982
• Location : Offsite

Used Spiral Helix Automatic Spiral Tubeformer - $ 135,000.00

Used Spiral Helix Automatic Spiral Tubeformer

Price - $ 135,000.00

Item # BTF518

More Pictures and Video of this Spiral Helix machine

• Model : H Helix 200-H
• capacity :20-28 gauge : 3" - 90" spiral pipe
• S/N : 03051007
• Electrics : 440v/60a/3p
• 17 heads (4", 5", 6", 7", 8", 9", 10", 12", 14", 16", 18", 20", 22", 24", 26", 28", 30")
• 2 10' run off tables
• 3 forming rollers 28-26 gauge, 24-22 gauge, & 20 gauge
• Approx. MFG Date : 2005
• approx. new list price : $200,000.00
• Location : offsite

Used Niagara Circle Shear - $ 500.00

Used Niagara Circle Shear

Price - $ 500.00

Item#1157

• 48" manual circle shear
• model # : T - 448 a
• S/N : N/A
• Electrics : N/A
• Approx. MFG Date : N/A
• approx. new list price : n/A
• Location : CPM Warehouse

Used Niagara 8' Pneumatic Shear - $ 4,000.00

SOLD !!

Used 8' Pneumatic Niagara Shear

Price - $ 4,000.00

Item#1125

More Pictures of this USED 8 foot Niagara Shear

• capacity : 16 gauge , 8 foot
• requires 120 psi continuous air
• 10'x3'x55" , 3000 lbs.
• S/N : N/A
• Electrics : N/A
• Approx. MFG Date : N/A
• approx. new list price : $9,000.00
• Location : CPM Warehouse

Used Roper Whitney 30" Stomp Shear - $ 1,000.00

Used Roper Whitney 30 Inch Foot Shear

Price - $ 1,000.00

Item#1116

More Pictures of this USED Roper Whitney Shear

• capacity : 30 "
• S/N : N/A
• Electrics : N/A
• Approx. MFG Date : N/A
• approx. new list price : $1,800.00
• Location : CPM Warehouse

Used Wysong Shear - $ 3,750.00

Used Wysong Hydraulic Shear

Price - $ 3,750.00

Item#1079

More Pictures of this used Wysong Hydraulic Shear

• capacity : 16 Gauge , 52"
• hand operated mechanical backgauge
• completely gone over by mechanics
• S/N : H52-429
• Electrics : motor rated for 208 - 220
• Approx. MFG Date : 1976
• approx. new list price - $5,900.00
• Location : CPM Warehouse

Used Engel Pitts Rollformer - $4,000.00

Used Engel Pittsburgh Rollforming Machine

Price - $4,000.00

Item#1124

More pictures of this used Engel Pittsburgh Rollformer

• model 800
• 16 gauge
• pittsburgh rollformer
• 20 gauge drive cleat rolls
• S/N : 4-956
• Electrics : 220
• Approx. MFG Date : 1974
• approx. new list price : $ 8,975.00
• Location : CPM Warehouse

Used Engel Rol Formit Rollformer - $3,500.00

Used Engel Rol Formit Rollforming Machine

Price - $3,500.00

Item#1090

More Pictures of this used Engel Rollformer

• 8 Station
• drive cleat
• male & female 20 gauge button lock / snap lock
• Model #362 - d
• S/N : 304263
• Electrics : 240 V / 3 Phase
• approx. MFG Date : N/A
• approx. new list price : $9,000.00
• Location: CPM Warehouse

Used Engel HB825 Rollformer - $7,000.00

Used Engel 825 Rollforming Machine

Price - $7,000.00

PRICE REDUCED - $5,000.00

Item#1122

• s & drive
• female pittsburgh rolls
• tri-Plex rolls
• separate slitter - not attached
• S/N : 320
• Electrics: 230, 3PH
• Approx. MFG Date : 1960's
• approx. new list price : $20,025.00
• Location: CPM warehouse

Used Engel Model 825 Rollformer - $6,000.00

Used Engel Model 825 Rollforming Machine

Price - $6,000.00

Item#1134

• s drive
• 20 gauge
• male and female button lock
• Model 825
• S/N - 9-532
• Electrics: 230 v / 3 PH
• Approx. MFG Date : N/A
• approx. new list price : $14,635.00
• Location: CPM warehouse

Used Lockformer Easy Edger - $450.00

Used Lockformer Easy Edger

Price - $450.00

Item#1156

• 20 gauge
• with stand
• s/N : 27300
• electrics : n/A
• approx. mfg. date : n/A
• approx. new list price : $ n/A
• Location: CPM Warehouse

Used Plate Cutter - $75.00

Used Plate Cutter

Price - $75.00

Item#1097

• 16 gauge stainless
• 14 gauge steel plate
• 8 gauge aluminum
• s/N : N/A
• electrics : n/A
• approx. mfg. date : n/A
• approx. new list price : $150.00
• Location: CPM Warehouse

Used Rowe Machinery Easy Load -$4,000.00

Used Rowe Machinery Easy Load Conveyor

Price - $ 4,000.00

Item#MI523

• Model : 810 (Easy load)
• max capacities 1200 pounds
• max. oD 36"
• 1/2 hP
• s/N : 20513
• electrics : wired for a 110v or 220 v dual voltage
• approx. mfg. date : 1975
• approx. new list price : $ 9,000.00 ( this machine hasnt been manufactured since 1996)
• Location: Offsite

Used Dyna Flux Cooler - $ 250.00

Used Dyna Flux Cooler (for spot welder)

Price - $ 250.00

Item#MI521

• Model : R-1000
• s/N : 61002386
• electrics : 230v/single ph
• approx. mfg. date : 1996
• approx. new list price : $564.00
• Location: Offsite

Used American Decoiler - $1,500.00

Used American Decoiler

Price - $ 1,500.00

Item#MI522

• Model : 60
• 1000 lb capacity
• non motorized
• 19" maximum width: expanding mandrell
• approx weight : 800 pounds
• s/N :8047
• electrics : n/A
• approx. mfg. date : 02/1980
• approx. new list price : $2,300.00
• Location: Offsite

Used Rowe Machinery Straightner -$5,000.00

Used Rowe Machinery Straightner

Price - $ 5,000.00

Item#MI524

• Model : a-10
• minimum thickness .020 M.S. / maximum .105
• s/N : 22601
• electrics : 220 v /3 pH
• approx. mfg. date : 1978
• approx. new list price : $ 16,500.00
• Location: Offsite

Used Wire Decoiler - $ Make Offer !!

Used Wire Decoiler

Price - $ Make Offer !

Item#MI525

• s/N :N/A
• electrics :N/A
• approx. mfg. date :N/A
• approx. new list price : N/A
• Location: Offsite

Used Engel Duct Master - $5,000.00

Used Engel Duct Master

Price - $5,000.00

Item# 1151

• 3'x10'
• 2 slitters
• 3' manual notcher 1617; with spring - loaded heads to hold material
• 6 heads that include button & Pitts notch and v notch (2 of each)
• Model # : 1018-3
• S/N : 1674-1
• electrics : 110 v / single phase
• Approx. mFG date : n/A
• Approx. New list price : $20,000.00
• Location: CPM Warehouse

Used Lockformer Slitter - $ 1,500.00

Used Lockformer Slitter

Price - $1,500.00

Item#1113

More Pictures of this used Lockformer Slitter

• capacities : 24 " , 16 gauge
• includes stand
• S/N : 2460
• electrics : single phase, 115-208/230
• approx. MFG. Date : 1980-1981
• Approx. New list price : $2,200.00
• Location: CPM Warehouse

Used Duro Dyne Compact Pin Spotter - $900.00

Used Duro - Dyne model MF compact pin Spotter

Price - $900.00

Item# 1140

• Weld pin compact pin spotter
• Model : MF
• S/N : 5330
• electrics : 110 V
• Approx. mFG date : 1970's
• Approx. New list price : $2,025.00
• Location: CPM Warehouse

Used Phase Converter - $ 600.00

Used Phase Converter

Price - $600.00

Item#1091

• Can run ONE - 5 HP motor or 2 or 3 smaller motors
• S/N : NE0905405
• Electrics : 230 Volts 10 AMPS
• Approx. MFG Date : N/A
• approx. new list price - $1,000.00
• Location : CPM Warehouse

Used Pneumatic Chisels - $50.00 Each

Used Pneumatic Chisels

Price - $50.00 Each

Item#147

• Model :Various
• Location: CPM Warehouse

Used Pexto Sheet Metal Former - $100.00

Used Pexto Sheet Metal Former

Price - $100.00

Item#1149

• s/N : N/A
• electrics : N/A
• approx. mfg. date : N/A
• approx. new list price : N/A
• Location: CPM Warehouse

Used Toledo Scale - $250.00

Used Toledo Scale

Price - $250.00

Item#1153

• Model : N/A
• s/N : pN13306000A
• electrics : n/A
• approx. mfg. date : n/A
• approx. new list price : $500.00
• Location: offsite

Used Joy Air Compressor and Pneutech Turbo Flow Compressed Air Aftercooler - $ 3,000.00

Used Joy Air Compressor and Pneutech Turbo Flow Compressed Air Aftercooler

Price for BOTH machines listed below - $ 3,000.00

Item#MI526

• Joy air compressor
• model : twistair III series model TAO50
• field shop air compressor with cooler (listed below)
• 50 HP / 125 pSI MAX
• well maintained : no hydraulics : very quiet
• s/N :N/A
• electrics :220/120 amps
• approx. mfg. date :N/A
• approx. new list price :N/A
• Location: Offsite

• pneumatech turbo flow compressed ari aftercooler
• model PAC - 64
• capacity 640 SCFM : max. pressure 3250 pSIG
• s/N :N/A
• electrics :230 v / 3 pH / 60
• approx. mfg. date : n/A
• approx. new list price : 3,396.00
• Location: Offsite

Used Speed Aire / Campbell Hausfeld Air Compressor- $ 900.00

Used Speed Aire / Campbell Hausfeld Air Compressor

Price - $ 900.00

Item#1150

• Model : 5Z185B
• s/N : 052792L 185622
• electrics : 230 v / 1ph
• approx. mfg. date : 1992
• approx. new list price : $1,500.00
• Location: CPM Warehouse

Used Kellogg-American Air Compressor - $ 2,500.00

Used Kellogg - American Air Compressor

Price - $ 2,500.00

Item#MI527

• s/N :833098
• electrics :220 / 440 3PH
• approx. mfg. date :N/A
• approx. new list price : $4,750.00
• Location: Offsite

Used Roll - $ 75.00

Used Rolls

Price - $ 75.00

Item#1154

• capacities : N/A
• Model # : N/A
• S/N : N/A
• electrics : N/A
• Approx. New list price : $ N/A
• Location: CPM warehouse

Used Engel Notcher - $ 3,500.00

Used Engel Notcher model 10LMMP

Price - $3,500.00

Item#1127

More Pictures of this used Engel Notcher

• 5 head - corner notch and v notch
• 20 gauge , 10'
• model # : 10LMMP
• s/N: 3162-1
• electrics : 220
• Approx. MFG Date : mid 1960's
• approx. new list price : $ 14,705.00
• Location: CPM warehouse

Used Lockformer Notcher - $ 4,000.00

Used Lockformer Notcher

Price - $4,000.00

Item#FRME01

• 20-28 gauge residential notcher
• v-notch 1-1/2" and corner notch 1-1/4"
• 5 notcher heads
• 1 HP
• s/N : N/A
• electrics : 115 V
• Approx. MFG Date : N/A
• approx. new list price : $11,021.00
• Location: Offsite

Used Pacific Brake - $30,000.00

Used Pacific Brake

PRICE - $30,000.00

Item # ASP02

• Capacity : 10 Foot X 1/4" Mild Steel
• needs a pit
• some tooling available w/ machine
• Model 150-10
• S/N : 2476
• Electrics : 220 / 3 Ph.
• Approx. Mfg. Date : 1968
• approx. new list pricing : N/A
• Location : Offsite

Used Chicago Brake Model 1012-L - $17,000.00

Used Chicago Brake

PRICE - $17,000.00

Item#US001

• 45-90 Ton Brake
• 10' - 6" between housings
• 14' bed
• 12' bottom die holder
• 2 pair dies 12' long
• Model : 1012-L
• S/N : L-15126
• electrics : N/A
• Approx. mfg. date : N/A
• Approx. New list price : N/A
• Location : Offsite

Used Proformer Box & Pan Brake - $14,000.00

Used Pro Former Box and Pan Brake

PRICE - $14,000.00

Item # RP01

• model : C6-12112
• hydrualic down flange box and pan brake
• segmented on BOTH the top and bottom
• Capacity : 10' / 12 gauge
• S/N : N/A
• Electrics : 115v/1ph/60hz
• Approx. Mfg. Date : 2005
• approx. new list pricing : N/A
• Location : Offsite

Used Duro - Dyne Spot Welder - $950.00

Used Duro Dyne Spot Welder

Price - $950.00

Item#1155

• 15" arms
• s/N : 40940
• electrics : 220v single phasse
• approx. mfg. date : n/A
• approx. new list price : $ n/A
• Location: CPM Warehouse

Used DT Peer Model P50-1-200-18S Resistance Press Type , Air Operated Welder - $15,000.00

Used DT Peer Resistance Press Welder

PRICE - $15,000.00

Item#ARE01

• requires air - 80PSIG
• this machine is still like NEW (Never used)
• adjustable / retractable stroke
• hydraulic jack
• quick change hose fittings
• automatic air line fiter
• water flow pressure switch
• water saver control
• visi flow water indicators
• 18" throat depth
• ram stroke 3"
• 200 KVA
• 45,000 max short circuit @ 12" X 18" throat
• Model : PS50-1-200-18 S
• serial # : 3134
• Electrics : 440/60/3PH
• Approx. Mfg. Date : 2002
• approx. new list price : N/A
• Location: offsite

Used Milwaukee Chop Saw - $150.00

Used Milwaukee Chop Saw

Price - $ 150.00

Item #1141

• 14" blade diameter
• model # : 6175
• serial # : 821az97402184
• electrics : 110v, 15amp
• approx. mfg. date : Sept. 1997
• approx. new list price: $306.00
• Location : CPM Warehouse

Used Lockformer Saw - $3,200.00

Used Lockformer Model 24S Saw

Price - $ 3,200.00

Item # GM516

• 24" blade height
• model # : 24S
• serial # : 2895
• electrics : 110 V
• approx. mfg. date : Mid 1960's
• approx. new list price: N/A
• Location : Offsite

Used Engel High Speed Stud Line - $105,000.00

Used Engel High Speed Stud Line

Item#BS504

Price - $ 130,000.00

PRICE REDUCED - $105,00.00

More pictures of this USED Engel High Speed Stud Line

• capacities : 20-26 gauge
• interior stud wall machine; High speed Stud rollformer for studs and hats channel and track
• under 200 hours of use
• notcher cut - chevron shape and oval ; delivery is available
• additional equipment : feed table, straightner, flying notcher, flying shear - hydraulic, roll former for studs and hat channel-15 HP motor
• 16' stacking table
• stud and track sizes:2.5", 3.625", 5.5", 6" furring channel
• S/N : 09052343003
• Electrics : 3 ph
• Approx. MFG. Date : 2005
• Approx. New List Price : $ N/A
• Location: Offsite

Used Pedinghaus Model 3201-B 100 Ton Punch - $7,500.00

Used Pedinghaus Model 3201-B 100 Ton Punch

Item#MI520

Price - $ 7,500.00

• capacities : 1-1/4";12-1/2" throat
• comes with 2-station hydraulic pump that can hook up two punches ( comes with one punch pump hung with spring)
• hydraulic unit : model h-12-ep-ep
• 1500lbs
• S/N : 1760
• Electrics : 220/440 volt - 3 ph
• Approx. MFG. Date : 1977
• Approx. New List Price : $ 25,500.00
• Location: Offsite

Used Boschert Model CP-1250 Rotation Precision CNC Punching Machine - $ 105,000.00

Used Boschert Model CP-1250 Rotation Precision CNC Punching Machine

Price - $105,000.00

Item#BPM507

More pictures of this USED Boschert CNC Punching Machine

• Serial# : 119
• Approx. Mfg. Date : 2005
• Full 360 degree stepless indexing of machine ram and die base
• Revotool, Boschert’s multi-tool solution with full indexing of all tools
• 6-way Revotool head and die plate
• High speed hydraulics
• Vacuum slug removal system
• Roller balls in table for easy movement of heavy sheets
• Maximum punching force 36 Tons
• Maximum working range without repositioning 50” x 80”
• Maximum X-Axis with automatic repositioning 39’
• Maximum punching diameter 4”
• Maximum sheet thickness ¼”
• Maximum sheet weight with material clamps 440 lbs
• Maximum positioning speeds
  X – axis, longitudinal 2360 ipm
  Y – axis, cross 1180 ipm
• Stroke length (variable) 0 – 3.54”
• Maximum stroke rate 800 spm
• Axis moves of 0.004” 385 spm
• Axis moves of 0.008” 275 spm
• Axis moves of 1.000” 175 spm
• Positioning accuracy +/- 0.002”
• Positioning repeatability +/- 0.001”
• Tool change time
  Mono-Tool manual change 15 sec.
  RevoTool automatic change 2 sec.
• Approximate weight 23,100 lbs.
• Approximate floor space required 12’ x 11’ x 6’ High
• Location: Offsite

*Tools and accessories available (to be confirmed prior to purchase):
Punch alignment rings (11), Single tool die plates (5), Punch alignment fixture, Stripper plate holder, Extra material clamp, Metalix CADKam software

Used Boschert Model CP-1250 Precision CNC Punching Machine - $ 95,000.00

Used Boschert Model CP-1250 Precision CNC Punching Machine

Price - $95,000.00

Item#BPM508

More pictures of this USED Boschert CNC Punching Machine

• Serial# : 1004
• Approx. Mfg. Date : 2006
• Maximum punching force 36 Tons
• Maximum working range without repositioning 50” x 80”
• Maximum punching diameter 4”
• Maximum sheet thickness ¼”
• Maximum sheet weight with material clamps 440 lbs
• Maximum positioning speeds
  X – axis, longitudinal 2360 ipm
  Y – axis, cross 1180 ipm
• Stroke length (variable) 0 – 3.54”
• Maximum stroke rate 400 spm
• Axis moves of 0.004” 280 ( 385 ) spm
• Axis moves of 0.008” 200 ( 275 ) spm
• Axis moves of 1.000” 125 ( 175 ) spm
• Positioning accuracy +/- 0.002”
• Positioning repeatability +/- 0.001”
• Tool change time
  Mono-Tool manual change 15 sec.
  RevoTool automatic change 2 sec.
• Approximate weight 23,100 lbs.
• Approximate floor space required 12’ x 11’ x 6’ High
• Brushes in table
• Location: Offsite

*Tooling includes Boschert punch adjustment unit, 2 self locking die adapters, 2 alignment rings, stripper
holder, and miscellaneous tools. CNCKad sytem software, a product of Metalix

Used 30 Ton W.A. Whitney Hydraulic Press - $17,000.00

W.A. Whitney 30Ton Hydraulic Press

Price - $17,000.00

Item # SSFA01

• Model # : 637A W.A. Whitney
• s/N : 637-650-27758
• controller : anilam crusader2
• table x58" y48"
• Travel speed is 200ipm
• pump : 10hp motor 3phase
• tooling included
• approx. new list price : N/A
• Location : Offsite

Used Verson 150 Ton Stamping Press - $75,000.00

Verson No. 150-B2-72 150 Ton Stamping Press

Price - $75,000.00

Item # PDS01

More Pictures of this USED VERSON 150 TON STAMPING PRESS

• Model # : 150-B2-72
• s/N : 20346
• Approx. MFG. Date : 1968
• electrics : 440 , 3PH
• Straight-Side Double Crank, Bed Meas. F-B 48”, L-R 72” Shut Height, 10 1/2" - 15 1/2" Digital Readout (5" Adjustment) Wintress CNC Feed & Press Controls "SmartPAC", 4-Point Tonnage Monitor (digital) Eagon "Press-Partner" Servo-Feeder, Rowe Straightner Max Material Thickness .089 x 23" Wide, "Littell" 3000 lb Decoiler,Light Curtains, Unisorb Level-Rite press mounts, Trabon "Lubriquip" Lube System,
• Location : Offsite