Engel TDF Rollformer | tdf rollformers | Roll formers | Rollforming Machines

Engel TDF Roll Formers

Engel TDF Rollformer Model HB-1640 WT

Engel's HB-1640 -WT Roll Former when equipped with TDF® tooling, produces our patented TDF® flange on straight duct work and fittings.

Sixteen Station rollformer with Engel's patented TDF® flange rolls with 1-1/4” Spindles Mounted
Outboard. Inboard and Opposite side Outboard Available for Additional Tooling. Includes TDF
SnapFlange Tooling Outboard. “F” Type Corner Required. The sixteen stations produce the highest quality flange in the industry.

Specifications for the Engel TDF Rollformer:
Forming Stations : 16
Pocket : 1.4"
Machine Capacity : Maximum..16 ga.
(TDF Rolls Rated for 26-18ga Unless Specified for 22-16ga)
Line Speed : 75 FPM
Motor : 7-1/2 HP/1800 RPM Manual Switch
Electrics (Must Specify) : 230 or 460/3 PH/60 cycle
Dimensions : 125"L x 29” W x 36” Pass Height
Ship Weight : 3150 Lbs.

Features for Engel's TDF Roll Former Model HB 1640 WT :
• Optional electricals available including single phase for job site applications
• No opening rolls required on any set of tooling
• Grease Lubricated Needle Roller Bearing
• Drive: Reducer motor and chain
• Unitized Steel Construction. Heavy top plate. Green Finish
• Construction: Hardened steel in-feed guide, to handle rough plasma cut edges,
all steel forming head, hardened steel forming rolls mounted on turned, ground
and polished spindles
• Tooling Sets for One Inboard and One Outboard are available

Optional Inboard Auxiliary Rolls for TDF:
MR-SS-20-16 1” Standing “S” Slip, 1-1/8” Pkt, 20-24 ga (Inboard)
MR-DSZ Duct Stiffener-Z Bar Roll Set– (Inboard) 16-20ga
MR-HS1640 Hat Stiffener Roll Set – (Inboard) 16-20ga
MR-SS-20-16-3 Standing “S” Slip, 1-1/8”, 1-5/8”, 2-1/8” (Inboard) With Horseshoe Spacers, 20-24 ga
MR-CSA Clip Stitcher Attachment, 20 Ga. Max
MR-EM 35mm Englemate- M-1640-O/S or M-1640-3/P Only
MR-EM-25 25mm Englemate- M-1640-O/S or M-1640-3/P Only

Optional TDF Outboard Auxiliary Rolls:
MR-PL-16-16 ½” Pocket, 16 ga Pittsburgh, 8 Stations, 16-24 Ga
MR-DP-1-5/8-16 Duplex Rolls, 16-20 Ga., 12 Stations
MR-T-18-16 3-in-1, 1-1/8” Combination Rolls (Triplex) 18-24 Ga
10 stations (Form is upside down only) 18 gauge
MR-AI-14-16 2 x 2 Angle, 14 gauge capacity, 12 stations
MR-AL-16-12 ½” Pocket, 16 Gauge (Double Seam) (Acme)
MR-T-1616-1-5/8 1-5/8” Leg 16 Station Triplex Rolls, 16-18 Ga
MR-TDA Clip Rolls – Inboard or Outboard (No Stitches) 20ga only
MR-CSA Clip Stitcher Attachment, 20 Gauge Max

Engel TDF Rollformer Model HB-1246

Engel's HB-1246 Roll Former when equipped with TDF® tooling, produces our patented TDF® flange on straight duct work and fittings.

Specifications:
Forming Stations : 12
Spindle Diameter : 1-1/4"
Gauge Range : (Galvanized) 18 ga.
Speed : 75 FPM
Motor : 5HP
Electrics : 230/460/3 PH/60 HZ
Dimensions : 100”L x 29” W x 33-1/2” H
Shipping Weight : 2700 Lbs.

Features For Engel's TDF Roll Forming Machine Model HB 1246 :
• 12 Station TDF Machine
• 18 Gauge Maximum Capacity
• ¼” Pocket
• TDF-18NB Tooling Outboard “C” Type Corner Required
• 1-1/4” Spindles
• One (1) Set of Outboard Spindles for Tooling are Available
• One (1) Set of Inboard Spindles for Tooling are Available
• Exclude Snap Flange Feature
• 5 H.P., 1800 RPM, 230 or 460/3/60 Motor
**Excludes Snap Flange Feature

OPTIONAL TDF OUTBOARD TOOLING:
MR-TDA- 1246-IB or MRTDA-1246-OB Clip Rolls , Inboard or Outboard ~ 20 ga.only 1.2”Pocket Height ~ 2 1/4” Material used
MR-CSA Clip Stitcher ~ 20 ga.maximum
MR-PL-18-12 1/2" Pocket ,18 gauge Pittsburgh ~18-24 ga. ~ 1/2" Pocket Height ~ 1 3/8” Material Used
MR-T-18-12 3-in-1 Triplex ~ 18-24 ga. ~ 1 1/8” ht Pocket Height ~ 1/2” – 3 1/4” Material Used
MR-AL-16-12 ACME 16 ga. ~ 16-20 ga. ~ 1/2" Pocket Height ~ 1 3/8” Material Used
MR-SS-20-12 1” Standing S Slip,inboard ~ 20–24 ga. ~ 1 1/8” pkt 1” ht Pocket Height ~ 6 1/2” Material Used
MR-PL-16-12 1/2" Pocket ,18 gauge Pittsburgh ~ 16-20 ga. ~ 1/2" Pocket Height ~ 1 3/8” Material Used

Models available for Engel's TDF Roll Forming Machines

• Engel Model HB 1246 TDF Rollformer
• Engel Model HB 1640 TDF Rollformer

Contact us about TDF roll formers.

Click Here For TDF Profiles

Click Here For Rollformer Tooling Profiles

Return to the HVAC/ROOFING/SIGNS Page

Return to the HOME PAGE