Norlok | Clinching/Fastening Systems |
Norlok Power line
Power Line
In two-stroke clinching, the material to be joined is
first deformed plastically inside a die. In a second phase, the joint
is created through a squeezing between the punch and anvil outside of
the die. The result is a high quality joint in terms of shape, strength
and repeatability.
What's Included:
A complete SPOT CLINCH® Power Line unit consists of a compact workhead
connected through a hydraulic hose to an air-over-oil pressure intensifier
(booster) with automatic cycle control, ready for connection to the
factory compressed air net. An air preparation unit with pressure regulator,
filter and water trap, a variety of tool kits, balancer and rotator
are available as options.
Advantages
• one tool set for the entire thickness range
• sturdy, rigid punches and dies give low tool consumption and
minimal operating costs
• no separate fasteners to buy, sort or feed
• no thermal stress around the jointed area
• very good consistency of the joint
• rapid, non-destructive testing of the joint
• low machine weight
• ideal for large workpieces
• ideal for joining more than two layers
• fastens pre-painted or galvanized material
• fastens stainless austenitic steel
• fastens materials with foils or adhesive intermediate layers
• for narrow flanges and clinching close to walls
Technical Data
Workhead weight 7.5 lbs 3.4 kg
Working air pressure 87 psi 6 bar
Hydraulic pressure at 6 bar 5,260 psi 365 bar
Cycle time 1.2-1.9 s 1.2-1.9 s
Max thickness, mild steel 0.160” 4 mm
Max thickness, stainless 0.120” 3 mm
The ATTEXOR Tools advantage
ATTEXOR, Inc. and ATTEXOR Tools have the most complete clinching technology
on the market today, and are ready to serve any manufacturing company
whose production processes involve the assembly of sheet material and
profiles.
• Simple, non-destructive quality control
• Highly consistent process
• No need for screws or rivets
• Short cycle times, 1.2-1.9 seconds
(0.9 seconds with high-speed booster)
• 4x faster than running screws
• Clean & silent, no sparks or fumes
• No thermal stress built in to the workpiece
• No preparation, no touch-up work
• For stainless steel, galvanized & prepainted materials
• For multiple layers of material
• For difficult-to-weld materials
• Simple compressed air power source
• Cost savings of fasteners
• The only clinching tools that have
ICBO/ICC building code approval
Return to TOP
Return the the
Norlok Main Page
Return to the Home Page
|
*
**Specials**