Norlok | Clinching/Fastening Systems |
Norlok Attexor alligator line
ATTEXOR Alligator Line
Extremely light, hand-held, articulated SPOT CLINCH®
machines from Attexor Tools, workhead weight 7-8 lbs (3.2-3.6 kg), cycle
time 0.6-1.0 seconds, capacity 2x16 ga (0.120”) total mild steel.
Applications include stud-to-track joining in both load-bearing structures
and for partition walls, and also in the HVAC sector, for enclosures,
appliances and general idustrial use.
Only ATTEXOR, Inc. holds ICBO/ICC building code approval.
To our knowledge, no other clinching equipment supplier has obtained
ICBO/ICC building code approval for its clinched joints in structural
members of cold-formed profiles (see ER-5439). This code approval is
valid in all seismic zones, including zones 3 & 4, and in areas
of high wind loads.
Advantages
• low investment (for lower production costs)
• rigid punches & robust dies give low tool consumption &
minimal operating costs
• reversible punches & dies
• manual jaw closing for maximum safety
• no separate fasteners to buy, sort or feed
• no thermal stress around the joined area
• highly consistent joint
• rapid, non-destructive testing of the joint
• low machine weight
• joining more than two layers
• pre-painted or galvanized sheet materials
Technical Data
Workhead weight 7-8 lbs 3.2-3.6 kg
Total weight, inc. Booster 28.6 lbs 13 kg
Working air pressure 87 psi 6 bar
Hydraulic pressure at 6 bar 5,260 psi 365 bar
Cycle Time 0.6-1.0 s 0.6-1.0 s
Max thickness, mild steel: 0.120” 3 mm
Max thickness, stainless: 0.100” 2.5 mm
The ATTEXOR Tools advantage
ATTEXOR, Inc. and ATTEXOR Tools have the most complete clinching technology
on the market today, and are ready to serve any manufacturing company
whose production processes involve the assembly of sheet material and
profiles.
• Simple, non-destructive quality control
• Highly consistent process
• No need for screws or rivets
• Short cycle times, 0.6-1.0 seconds
• 4x faster than running screws
• Clean & silent, no sparks or fumes
• No thermal stress built in to the workpiece
• No preparation, no touch-up work
• For stainless steel, galvanized & prepainted materials
• For multiple layers of material
• For difficult-to-weld materials
• Simple compressed air power source
• Cost savings of fasteners
• The only clinching tool that has
ICBO/ICC building code approval
Return to TOP
Return the the
Norlok Main Page
Return to the Home Page
|
*
**Specials**