Roper Whitney
10M14 Mechanical Shear
Roper Whitney's 10M14 Mechanical shear is the latest addition to
the Roper Whitney line of shears. Manufactured in the United States,
the 10M14 Mechanical sheet metal shear is of rugged construction,
weighs in at 5,500 pounds, and is powered by a 5 horsepower motor.
The 10M14 mechanical shear produces up to 35 strokes per minute.
Standard Features of the Roper Whitney 10M14 Mechanical Shear:
- Made in the U.S.A.
- Rugged Welded Construction
- Single or Continuous Cycle
- Accurate Table Side-Squaring Gauges
- Recessed Inch/Metric Bed Scales
- Combination Material Hold-Down/Finger Guard with Non-marring
Urethane and Positive Spring Actuation
- High Carbon/High Chrome Long Life Tool Steel Blades
- Upper and Lower Blades Interchangeable
- Non-Metallic Gibs
- Maintenance Free Self Lubricating Bearings
- Fully Guarded Safety Foot Switch
- Low Power Consumption
- Smooth Quiet Reliable Operation
Additional Options for the Roper 10M14 Mechanical Shear:
- Front arms
- Side Squaring Arms in 4', 8', or 12' Lengths with Fixed
Stop and Inlaid Scale
- Squaring Arm Flip Stop
Backgauge Options For the R.W. 10M14 Mechanical Shear are : Rear
Operated Manual with Precision Scale Front Operated Manual with
Chain Drive and Position Counter DRO-Motor Driven with Digital Readout
NC-Motor Driven with encoder Feedback, and Digital Readout with
Five Preset Positions
10M14 Mechanical sheet metal shear Specifications:
- Capacity - 14 Ga.mild steel
- Working Length - 121.25 inches
- Back Gauge Travel - 24 inches
- Approximate Weight - 5500 lbs.
- Power - 5 hp
- Standard Voltage - 230 vac 3 hp 60 Hz
- Strokes Per Minute - 35
Roper Whitney 10M10
Mechanical Shears
Standard Features of the Roper
Whitney 10M10 Mechanical Shear:
- Rugged Welded Construction
- Single or Continuous Cycle or Jog
- External Blade Gap Adjustments
- 30" DRO Front Operated Powered
Back Gauge
- Front Material Return System with
Sheet Support
- Front Material Chute
- Combination Material Hold-Down/Finger
Guard with Non-marring Urethane and Positive Spring Actuation
- High Carbon/High Chrome Long Life
Tool Steel Blades
- Upper and Lower Blades Interchangeable
- Work Light Beam
- Non-Metallic Gibs
- Front Extension Arms
- Low Power Consumption and Quiet
Operation
- 43 Strokes Per Minute
- Fully Guarded Safety Foot Switch
- 43" Side Extension Squaring
Arm with Recessed Inch/Metric Scale
Specifications of the Roper Whitney 10M10 Mechanical
Shear:
*
**Specials**