|
|
Duct Beader | Duct Beading Machine
Tin Knocker
Duct Beader
Tin Knocker 60" x 16 Ga. adjustable Duct beader
Produces SMACNA approved beads in a fraction of the time it takes
to cross brake your duct work. A one man operation, this heavy duty
duct beader comes with five (5) sets of bead tooling that can be
located anywhere over the 60" working length. Tooling, if broken
or damaged, is replaceable without the requirement of replacing
an entire cross shaft. Beads are adjustable for this duct beader
in depth to 3/16" deep. This Tin Knocker Duct Beading
Machine has a powered exit support roll to ensure no material
hang-up.
Specifications for Tin Knocker Duct Beaders:
- Capacity: 16 Ga. Mild Steel (Galvanized)
x 60" (1.5mm x 152.4cm)
- Motor: 1 H.P.,115v, Single Phase, 60 Hz Standard (230/1/50
available)
- Dimensions: Approx. 80"L x 43"W x 34" Passline
Height (203cm x 109cm x 86cm)
Lockformer Duct Beader Model
6016
When the job calls for heavy-duty "giants,"
this machine tool is it. With this 6016 Beader, only one operator
is needed to produce SMACNA-approved beads 4-5 times faster than
cross braking. It forms five beads, on 12" centers, adjustable
to 1/8" depth. Maximum capacity is 16 gauge material and
one operator can easily handle sheets up to 60" wide.
SPECIFICATIONS :
- CAPACITY : Up to 5-foot-wide material 16 gauge maximum
- DEPTH OF POCKET/SIZE : 1/8"
- SPEED : 55 feet per minute
|
*
**Specials**
