CINCINNATI Precision Machinery - sheet metal fabrication machinery specialists...we are here to serve you for all of your sheet metal fabricating machinery

Here at CPM we represent machinery for all of your sheet metal fabrication needs - everything from hand tools to lasers , coilines to brakes, notchers to ironworkers and much more. Please give us a call or glance through CINCINNATI Precision Machinery 's site for all your sheet metal fabrication needs.

	Precision Fabrication Machinery
	HVAC, Roofing & Signs
	Used Machinery
	Upcoming Events
	Specials**
	Consumables
	About Us
	Contact Us
	Home

Cleat benders powered

Flagler electric cleatfolder / cleat bender

Flagler Electric Cleatfolder / Cleat bender

The Flagler Open Throat Electric Cleatfolders are the fastest in the industry. Each of the Flagler Electric Cleatfolder model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

flagler open throat electric cleat folder / cleatbender

Specifications for the Flagler Electric Cleatfolders:

Capacity: 20 Ga. and Lighter
Length of Cleat Edge: 1/2”
Cycle Time: Approx. 2 ¼ Seconds
Motors: 2 HP 230/3/60/1800 RPM. and 1/3 HP 230/3/60/1800 RPM
Dimensions: EC-30 60" wide x 27" long and EC-36 66” wide x 27” long
Shipping Weight: EC-30 1,050 pounds And EC-36 1,150 pounds

Flagler Open throat pneumatic clat bender/ cleat folder

Flagler Open Throat Pneumatic Cleat Bender / Cleat Folder

The Flagler Open Throat Pneumatic Cleatfolders come complete with 6 gallon surge tank so they can be operated from a standard 3/8” compressed air line. Each model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

Flagler Open throat pneumatic clat bender/ cleat folde

Specifications for the Flagler pneumatic cleatfolder / cleatbender :

Capacity: 20 Ga. and Lighter
Length of Cleat Edge: 1/2”
Power Requirement: 120 Volt Control Power 100 PSI Compressed Air (3/8” Line)
Cycle Time: Approx. 4 Seconds (Light Gauge) or Approx. 6 Seconds (Heavy Gauge)
Dimensions: AC-24 54" wide x 27" long and AC-30 60” wide x 27” long
Shipping Weight: AC-24 850 pounds and AC-30 950 pounds

Flager Drive Turn Hemmer

Flagler Drive Turn Hemmer

Rollform your drive turn hems on this Flagler Drive Turn machine after notching and prior to bending into L or full wrap sections. Simple select the sections to be hemmed with the selector switch and run through. This Flagler Drive turn hemmer machine will hem the 1st and 3rd quadrants or the 2nd and 4th quadrants.
This Flagler Drive Turn Hemmer Machine is equipped with an additional set of extended shafts for optional tooling.

Flagler Drive Turn Hemmer

Specifications for the Flagler Drive Turn Hemmer :

Capacity: 20 Ga. and Lighter
height of flange : 1/2”
Speed: Approx. 100 feet per minute
Motor: 5 HP 230/3/60/1800 RPM . (100 PSI Compressed Air (3/8” Line) also required.
Drive: Vee Belt.
Base: Arc Welded Steel. Heavy Top Plate
Dimensions: 68" long x 24" wide
Shipping Weight: Approximately 1,050 pounds

Return to the HVAC/ROOFING/SIGNS Page

Return to the Home Page